Concrete Stairs Calculator
🛒 Recommended Tools & Equipment
Compare pricing and in-stock inventory for your project:
As an Amazon Associate I earn from qualifying purchases.
Heavy-Duty Concrete Stair Form Brackets
Reusable steel stair form clamps for securing wooden riser boards accurately during step pours.
Concrete Finishing Tool Set with Edger & Groover
Essential hand tools for smoothing step treads and creating rounded, chip-resistant step edges.
How This Estimator Works
This specialized concrete calculator computes the exact volume of ready-mix concrete and pre-blended dry bags needed for solid poured concrete steps with an optional top landing slab. Solid concrete stairs are formed from consecutive rectangular steps whose cumulative volume follows the step summation formula: Volume = Width × Run × Rise × n(n + 1) ÷ 2, where n is the total number of steps. If your project includes an extended top landing platform, its separate slab volume is calculated and added to the total. Results display total cubic feet, cubic yards, and cubic meters alongside exact bag counts for 80 lb, 60 lb, and metric 25 kg sacks, with an adjustable waste allowance to cover jobsite variances. Always verify local stair riser and tread building requirements before building forms.
Formulas & Calculation Principles
Steps Volume (cu ft) = Width (ft) × (Run (in) ÷ 12) × (Rise (in) ÷ 12) × [n × (n + 1) ÷ 2]
Landing Volume (cu ft) = Length (ft) × Width (ft) × (Thickness (in) ÷ 12)
Total Volume with Waste (cu ft) = (Steps Volume + Landing Volume) × (1 + Waste % ÷ 100)
Volume in Cubic Yards = Total Volume (cu ft) ÷ 27
Metric Volume (m³) = Total Volume (cu ft) × 0.028317
80 lb Bags Needed = Total Volume (cu ft) ÷ 0.60 cu ft
60 lb Bags Needed = Total Volume (cu ft) ÷ 0.45 cu ft
25 kg Bags Needed = Total Volume (cu m) ÷ 0.012 m³
Step-by-Step Worked Example
Pouring 4 solid concrete steps measuring 3 feet wide, with 7 inches of riser height and 11 inches of tread run, at 0% waste allowance:
1. Step summation factor for 4 steps: 4 × (4 + 1) ÷ 2 = 10.
2. Step tread run in feet: 11 inches ÷ 12 = 0.9167 ft.
3. Step riser height in feet: 7 inches ÷ 12 = 0.5833 ft.
4. Stair width: 3 ft.
5. Steps nominal volume: 3 ft × 0.9167 ft × 0.5833 ft × 10 = 16.04 cu ft (0.59 cu yd / 0.45 m³).
6. Adding an optional 3 ft × 3 ft top landing at 4 inches thick: 3 ft × 3 ft × (4 ÷ 12) ft = 3.00 cu ft.
7. Total project volume with landing: 16.04 cu ft + 3.00 cu ft = 19.04 cu ft (0.71 cu yd / 0.54 m³).
8. Bag requirements (0% waste):
- 80 lb bags (0.60 cu ft yield): 19.04 ÷ 0.60 = 31.74 -> Round up to 32 bags (27 bags for steps only).
- 60 lb bags (0.45 cu ft yield): 19.04 ÷ 0.45 = 42.31 -> Round up to 43 bags (36 bags for steps only).
- 25 kg bags (0.012 m³ yield): 0.539 ÷ 0.012 = 44.92 -> Round up to 45 bags (38 bags for steps only).
Concrete Stairs Reference Table (3 ft Width, 7 in Rise, 11 in Run)
Quick lookup guide for nominal concrete volume and 80 lb bag requirements per linear foot of depth/height (0% waste allowance):
| Steps | Volume (cu ft) | Volume (cu yd) | Volume (m³) | 80 lb Bags | 60 lb Bags |
|---|---|---|---|---|---|
| 2 Steps | 4.81 cu ft | 0.18 cu yd | 0.14 m³ | 9 bags | 11 bags |
| 3 Steps | 9.63 cu ft | 0.36 cu yd | 0.27 m³ | 17 bags | 22 bags |
| 4 Steps | 16.04 cu ft | 0.59 cu yd | 0.45 m³ | 27 bags | 36 bags |
| 5 Steps | 24.06 cu ft | 0.89 cu yd | 0.68 m³ | 41 bags | 54 bags |
| 6 Steps | 33.69 cu ft | 1.25 cu yd | 0.95 m³ | 57 bags | 75 bags |
Frequently Asked Questions (FAQ)
How many bags of concrete do I need per step?
For standard residential steps measuring 3 feet wide with a 7-inch rise and 11-inch run, the bottom step consumes roughly 1.6 cubic feet of concrete, with volume compounding progressively for every step above it. Two steps require approximately 9 bags of 80 lb mix, three steps require 17 bags, and four steps require 27 bags without a landing. Use the calculator to enter your exact stair dimensions and top landing.
Do I need rebar reinforcement or formwork for poured concrete stairs?
Yes. Poured concrete stairs require sturdy 2x6 or 2x8 dimensional lumber stringers with riser boards securely staked and braced against outward pressure. Internal reinforcement using #4 (1/2-inch) Grade 60 rebar grids or steel dowel pins drilled and tied into an adjoining foundation or slab prevents settlement, cracking, and stair separation.
How thick should the top landing slab be on concrete stairs?
A typical top landing slab should be at least 4 inches (10 cm) thick for standard foot traffic and 5 to 6 inches (13 to 15 cm) thick if matching an elevated structural porch or entryway. The sub-base beneath the landing should be excavated and compacted with 4 inches of crushed gravel to ensure moisture drainage and prevent unlevel settling.
Can I pour concrete stairs directly over existing old steps?
Pouring a thin concrete cap over crumbling or deteriorating steps typically cracks and delaminates within a few seasons. However, if the old concrete stairs are structurally sound, uncracked, and properly pitched, you can pour new concrete over them provided the existing surface is pressure-washed, roughened, coated with a professional bonding adhesive, and anchored with drilled rebar pins.
Technical & Trade Disclaimer
Material quantities and volume estimates provided by this calculator are for planning and estimation purposes. Always consult local building codes, structural engineering drawings, or professional trade contractors before placing bulk orders.